我现在在做ASP的安装程序，这样可以方便用户的使用。我使用的InstallShield版本是InstallShield Professional—Standard Edition6.3。
  我没有用过这个东东，问题如下：
  
  问题一
  通过Project Wizard-generated script 做好了COPY打包工作。可是6.3版本的好象不支持主体Program...Endprogram，因为我看COPY打包的Script脚本就是通过两个Fuction实现的。所以我的脚本加不进去，除非在这两个Fuction中调用！请问是不是6.3版本不能使用Program...Endprogram，如果可以使用的话，应该如何去用？
  
  问题二
  想在COPY完ASP程序后直接实现IIS的设置，也就是通过安装程序就可以完成，不需要手动设置，请问怎样去实现呢？
  
  以下就是我用Project Wizard-generated script 做好的两个Fuction，他们不用调用也不用声明定义就自动执行，真是搞不懂呀！我的Script该加在什么地方呢？
  // Include header files
  
  #include "ifx.h"
  function OnFirstUIBefore()
  number nResult,nSetupType;
  string szTitle, szMsg;
  string szLicenseFile, szQuestion;
  string szName, szCompany, szSerial;
  string szTargetPath;
  string szDir;
  string szComponents, szTargetdir;
  number nLevel;
  LIST listStartCopy;
  number nvSize;
  begin
  nSetupType = TYPICAL;
  TARGETDIR = "C:"^"inetpub" ^"wwwroot" ^@PRODUCT_NAME;
  szDir = TARGETDIR;
  szName = "";
  szCompany = "";
  szSerial = "";
  
  Dlg_Start:
  // beginning of dialogs label
  
  Dlg_SdWelcome:
  szTitle = "";
  szMsg = "";
  nResult = SdWelcome( szTitle, szMsg );
  if (nResult = BACK) goto Dlg_Start;
  
  Dlg_SdLicense:
  szLicenseFile = SUPPORTDIR ^ "license.txt";
  szTitle = "";
  szMsg = "";
  szQuestion = "";
  nResult = SdLicense( szTitle, szMsg, szQuestion, szLicenseFile );
  if (nResult = BACK) goto Dlg_SdWelcome;
  
  Dlg_SdReGISterUserEx:
  szMsg = "";
  szTitle = "";
  nResult = SdRegisterUserEx( szTitle, szMsg, szName, szCompany, szSerial );
  if (nResult = BACK) goto Dlg_SdLicense;
  
  Dlg_SdAskDestPath:
  szTitle = "";
  szMsg = "please select setup folder";
  nResult = SdAskDestPath( szTitle, szMsg, szDir, 0 );
  TARGETDIR = szDir;
  if (nResult = BACK) goto Dlg_SdRegisterUserEx;
  
  Dlg_SetupType:
  szTitle = "";
  szMsg = "";
  nResult = SetupType ( szTitle , szMsg , "" , nSetupType , 0 );
  if (nResult = BACK) then
  goto Dlg_SdAskDestPath;
  else
  nSetupType = nResult;
  if (nSetupType != CUSTOM) then
  szTargetPath = TARGETDIR;
  nvSize = 0;
  ComponentCompareSizeRequired(MEDIA,szTargetPath,nvSize);
  if (nvSize != 0) then
  MessageBox( szSdStr_NotEnoughSpace, WARNING );
  goto Dlg_SetupType;
  endif;
  endif;
  endif;
  
  Dlg_SdComponentTree:
  if ((nResult = BACK) && (nSetupType != CUSTOM)) goto Dlg_SetupType;
  szTitle = "";
  szMsg = "";
  szTargetdir = TARGETDIR;
  szComponents = "";
  nLevel = 2;
  if (nSetupType = CUSTOM) then
  nResult = SdComponentTree(szTitle, szMsg, szTargetdir, szComponents, nLevel);
  if (nResult = BACK) goto Dlg_SetupType;
  endif;
  
  Dlg_ObjDialogs:
  nResult = ShowObjWizardPages(nResult);
  if (nResult = BACK) goto Dlg_SdComponentTree;
  
  Dlg_SdStartCopy:
  szTitle = "";
  szMsg = "";
  listStartCopy = ListCreate( STRINGLIST );
  nResult = SdStartCopy( szTitle, szMsg, listStartCopy );
  ListDestroy(listStartCopy);
  if (nResult = BACK) goto Dlg_ObjDialogs;
  
  // setup default status
  SetStatusWindow(0, "");
  Enable(STATUSEX);
  StatusUpdate(ON, 100);
  return 0;
  end;
  
  ///////////////////////////////////////////////////////////////////////////////
  //
  // FUNCTION: OnMoving
  //
  // EVENT: Moving event is sent when file transfer is started as a result of
  // ComponentTransferData call, before any file transfer operations
  // are performed.
  //
  ///////////////////////////////////////////////////////////////////////////////
  function OnMoving()
  string szAppPath;
  begin
  szAppPath = TARGETDIR;
  RegDBSetItem(REGDB_APPPATH, szAppPath);
  RegDBSetItem(REGDB_APPPATH_DEFAULT, szAppPath ^ @PRODUCT_KEY);
  end;
  // --- include script file section ---
  
  
  
    做人要厚道，请注明转自酷网动力(www.ASPCOOL.COM)。